purifier cell logic+ class II, type A2

Logic Class II, Type A2 Biosafety Cabinets deliver personnel, product, and environmental protection from hazardous airborne particulates, supporting applications up to BSL 1–4 containment. They are well suited for work involving antineoplastic drugs, genetic material, and other hazardous agents. All units are NSF-listed and built to meet rigorous safety and performance standards.

Room air enters through the front intake grille and blends with contaminated air beneath the work surface. An ECM blower pulls this air through the rear plenum; approximately 70% is recirculated through the supply HEPA filter to maintain an ISO Class 5 work environment, while the balance is discharged through a high-efficiency exhaust HEPA filter.

Features

• Smart-Start™ System allows user to start up and shut down cabinet functions by raising and lowering the sash

• Night-Smart™ System for idling the blower when the sash is fully closed

• Full operational maintenance and certification logs for detailed record keeping

• Status line for alarm conditions and alerts to warn when filter life diminishes to 20% and 10% before alarming at 0%

• Interval/elapsed timer for experiment monitoring

• UV light timer (on models with UV)

• Password protection for cabinet settings

• 8 Languages

• Bright, glare-free LED lighting up to 180 foot-candles (1937 lux). Located outside the contaminated work area

• Curved, stainless steel inlet grille with waterfall design and Reserve-Air™ Secondary Airflow Slots

• Air-Wave™ Entry System at access opening to enhance containment

• Contain-Air™ Negative Pressure Channel at top of sash to enhance containment

• Two electrical outlets. Flush mounted stainless steel cover with dampened hinges

• 115V GFCI, double receptacles, maximum amperage draw 5A

• 230V, single receptacles, maximum amperage draw 3A

• 10° angled, fully closing sash. 1/4" tempered safety glass with counterbalanced, anti-racking, easy-to-lift mechanism

• Unitized, pressure tested stainless steel interior. Optic White epoxy-coated steel exterior

• Removable towel catch located under work surface

• 8", 10", or 12" (20.3, 25.4, or 30.5 cm) working sash height

• 22.5" (57 cm) max. sash opening & 27.0" (69 cm) viewing height

• Removable, seamless type 304 stainless steel, dished work surface with lift out knobs

• Nominal inflow velocity of 105 fpm (0.53 m/sec)

• Nominal downflow velocity of 55 fpm (0.28 m/sec). 6' x 12" sash models nominal downflow velocity of 50 fpm (0.25 m/s)

• Approximately 70% air recirculation

• Noise level <60 dB (4ft 10" model)

• 10' (3 m) power cord with plug

• Six year warranty

Compliance

• NSF/ANSI Standard 49 listed

• NSF/ANSI 49 compliant (Cell Logic models)

• ISO Class 5 (Grade A) per ISO 14644-1

• UL Standard 61010-1

• CAN/CSA 22.2 No. 61010-1

• CE/UKCA Mark (230V models)

• ADA-compliant

Options

• 3’, 4’, 5’ and 6’ widths

• International electrical configurations

• Unassembled, NSF-approved, epoxy-coated steel, non-welded telescoping base stand with leveling feet

• Accessory Package

  • UV lamp (254 nm)

  • Right-side service fixture with ball-type valve

  • Right and left-side Vacu-Pass™ Cord & Cable Portal

• Ventus II Canopy Connection

• Cell Logic Packages

  • Scope-Ready™ Package consisting of 7.0" wide x 10.5" high (18 x 27 cm) sash cutout and Pure-Vu™ Seal with powder-coated steel collar. Stand-Still™ Isolation Platform is required and sold separately.

  • Temp-Zone™ Package consisting of temperature-controlled work area, 10.5" wide x 12.0" deep (27 x 30 cm) located on the left side of the work surface. Water circulator is required (not included). Circulator requirements: minimum flow rate of 0.4-0.5 GPM (1.5-1.9 LPM), typical volume of 6 liters, and temperature of 0-50° C (chiller/heater).