products

pro series fume hoods

  • overview
  • details
  • options
  • resources
  • sustainability
  • families


standard
versatile, reliable

The Pro Series fume hood has been engineered for both performance and economical savings, making it our most requested fume hood model.

  • Stainless steel airfoils
  • Durable chain and sprocket sash system
  • Available in a variety of configurations
  • Special applications include distillation, perchloric acid and radioisotope
  • CAV or VAV

 

 

RFV2 Series Fume Hoods - New England Lab in Partnership with Mott Manufacturing

Face Velocities

  • Designed for 80-100 fpm face velocity
  • Tested to ASHRAE-110 Guidelines
     

Sash Counterbalance System

  • Chain and sprocket sash
  • Durable for long lifespan
     

Viewing Sash

  • Provides a clear and unobstructed side to side view of fume hood interior
  • 28-1/2” high sash opening
     

Lower Airfoil

  • Stainless steel lower airfoil 
     

Chemical Resistant Liner

  • Standard fiberglass reinforced polyester liner
  • Additional liner materials available
     

Access Panels

  • Interior gasketed access panels 
  • Removable exterior side panels for ease of access to plumbing and electrical service fixtures
     

Duct Collar

  • Bell shaped Type 316 stainless steel collar
     

Electrical Services

  • Two UL / CSA approved duplex receptacles provided for 120 volt service
  • UL / CSA approved fluorescent or LED light fixture
  • UL 1805 Classified
     

Plumbing Services

  • Front post is pre-punched to accept up to five plumbing fixtures per side
  • Optional factory pre-plumbing of front-loaded remote fixtures 
     

Fume Hood Types

  • Variety of types for special applications (perchloric & radioisotope)
  • Bench-mount fume hood
  • Floor-mount fume hood
  • ADA fume hood
  • Distillation fume hood
  • Double-sided fume hood
  • Demonstation fume hood
  • Custom
     

* Pro Series fume hood is trademarked and produced by Mott Manufacturing.

 

Optional Self-Lowering Sash System
 

  • Sash latch temporarily secures the sash in the full open position for setup and tear down
  • When the latch is freed, the sash automatically returns to the operational position 
     

Optional Automatic Sash Closing System

Electronic occupancy sensor system closes the sash automatically when not in use, or within a timed interval when operator moves away from the fume hood.

Some other commonly requested Pro Series options include:

  • Viewing Panels for increased visibility
  • Sash Operation Options (Vertical, Horizontal, Combination, Split-Post, etc)
  • A Flush sill

Product Brochures

Title Size Download MyPortfolio
Mott - Demonstration Fume Hood Brochure 1.65 mb download [+]
NEL - Pro Series Fume Hood Brochure 1.17 mb download [+]
NEL Direct - Rapid Ship Catalog 5.07 mb download [+]

Product Specifications

Title Size Download MyPortfolio
Painted Steel Powder Coat Appendix 1 15 kb download [+]
Pro Series Fume Hood Specifications 77 kb download [+]

Product Manuals

Title Size Download MyPortfolio
Fume Hood User and Installation Product Manual 461 kb download [+]

Corporate Literature

Title Size Download MyPortfolio
Lab Fume Hood Selector Guide 745 kb download [+]

Catalog Sections

Title Size Download MyPortfolio
Mott Fume Hood Catalog Section P 7.02 mb download [+]
Mott Fume Hood Introduction Catalog Pages P1-P3 399 kb download [+]
Mott Pro Series Fume Hoood Catalog Pages P4-P13, P24-P25, P34-P35 & P40-P57 3.20 mb download [+]
Rapid Ship Catalog - Fume Hoods & Accessories 328 kb download [+]

Our low flow fume hoods can result in considerable energy cost reduction and ensure operator safety.  Designed to operate from 60-100 feet per minute face velocities.  They have been tested as low as 50 feet per minute.

Our low volume option can result in considerable energy savings by reducing the sash opening size.

An Automatic Sash Operating System can be incorporated that lowers and/or rises automatically which can enhance safety and dramatically increase the efficiency of Variable Air Volume (VAV) fume hood systems.

Steel

Painted steel consists of 85% or greater recycled content:

  • 42% post consumer which can contribute to LEED 2.2 credit MR4.1 & M4.2
  • 27% pre-consumer which can contribute to LEED 2.2 credit MR4.1 & M4.2
  • Systems solutions that maximize mobility and adaptability creating a user friendly, long life-cycle laboratory.
  • Durable, high-quality surface protection with minimal waste and Zero VOC's.
  • Durability that meets and exceeds SEFA 8 performance standards, to provide an even longer product life cycle.


Stainless steel consists of 90% recycled content:

  • 80% post consumer which can contribute to LEED credit MR4
  • 20% pre-consumer which can contribute to LEED credit MR4
  • Durable, high-quality surface protection with minimal waste and Zero VOC's.
  • Durability that meets and exceeds SEFA 8 performance standards, to provide an even longer product life cycle.
pro series - bench mounted fume hood thumbnail

pro series - bench mounted fume hood

Bench mounted fume hoods allow work to be done at standing or sitting heights and sit conveniently on a 30" deep countertop. With a range of sash styles and liner materials, this hood can provide safety and protection for a wide variety of benchtop applications.

pro series - floor-mounted fume hood thumbnail

pro series - floor-mounted fume hood

This fume hood (formerly called a walk-in) is freestanding and is available with many sash configurations. These hoods can allow for larger items to be wheeled in at floor level or can provide protection by containing large floor-mounted equipment.

pro series - distillation hood thumbnail

pro series - distillation hood

This extra tall hood can be set on a low height table to maximize vertical space. This hood is especially helpful when you need the height of a floor mounted hood but also need the convenience of a traditional hood worksurface such as a distillation set up.

pro series - accessible hood thumbnail

pro series - accessible hood

This fume hood is designed to meet ADA requirements for accessibility. With the proper base cabinet configuration the hood services can be within accessibility guidelines. The combination sash also allows for ease of use from a seated position.

pro series - demonstration bench hood thumbnail

pro series - demonstration bench hood

Designed for instructor demonstrations this hood has a sash on both sides to permit full viewing by the instructor and observers. This hood can be utilized free-standing or is commonly installed in the wall between a classroom and a prep room.

pro series - perchloric acid hood thumbnail

pro series - perchloric acid hood

The perchloric acid hood is designed with a seamlessly welded and coved stainless steel liner with integral countertop. The hood has an internal wash-down system to prevent accumulation of dangerous oxidizers.

pro series - radio isotope hood thumbnail

pro series - radio isotope hood

Designed to meet the stringent requirements of radioisotope applications, this hood is designed with a seamlessly welded and coved stainless steel liner with integral counter top. The countertop has been reinforced to support the weight of lead bricks.

need it now?

Purchase laboratory furniture and accessories from our online store!

(888) 635-2949

new england lab | lab-tested furniture systems - View Our Complete Line of Casework, Cabinets, Adaptable Lab Furniture Systems, Fume Hoods and More
new england lab, lab-tested furniture systems, laboratory casework, adaptable furniture, casework, lab construction, lab design-build projects,quick ship,
New England Lab: lab-tested furniture systems - View Our Complete Line of Casework, Cabinets, Adaptable Lab Furniture Systems, Fume Hoods and More!